Cadmium Yellow Light Pigment

Cadmium Yellow pigments are the most durable yellow, orange, and red inorganic pigments commercially available. They have excellent chemical and heat stability and can be used in chemically aggressive environments and durable applications without color fade.

Cadmium zinc sulfide pigments were developed in response to the need for stable, lighter shades of cadmium yellow. Cadmium and zinc salts of the same anion are used to form the pigment with up to 25% zinc content.

For a detailed explanation of the terms in the table above, please visit Composition and Permanence.

Origin and History

When first introduced, there were few stable, bright pigments in the yellow to red range, with stable orange and bright red being very rare. The cadmium pigments eventually replaced compounds such as mercury sulfide (vermilion) with improved lightfastness.

Cadmium sulfide was suggested as a pigment in 1819 by Stromeyer, but it was not commercially available until the 1840s due to the scarcity of metal required for its production.

Source

About half the consumption of cadmium, which is about 2,000 tons annually, is used to produce colored cadmium pigments. The principal pigments are a family of yellow, orange, and red cadmium sulfides, sulfoselenides, and compounds with metals other than cadmium.

Cadmium pigments are highly saturated with good permanence and tinting power. Cadmium yellow, cadmium orange, and cadmium red are familiar artists’ colors and are frequently employed as architectural paints since they can add long life and vibrancy to coatings. Their most important use is in the coloring of plastics and specialty paints which must resist high processing or service temperatures.

The following are commonly used cadmium pigments in artists’ paints:

Light shades of cadmium yellow are cadmium zinc sulfide, typically a greenish-yellow solid solution of CdS and ZnS. Colour Index Pigment Yellow 35 (PY35).

Deep shades of cadmium yellow are cadmium sulfide (CdS). Colour Index Pigment Yellow 37 (PY37).

Cadmium orange is cadmium sulfoselenide, a solid solution of CdS and CdSe. Depending on the sulfur to selenide ratio, Colour Index Pigment Orange 20 (PO20) or Colour Index Pigment Red 108 (PR108) is obtained.

Cadmium red is cadmium sulfoselenide. Colour Index Pigment Red 108 (PR108).

Cadmium green is sometimes a mixture of cadmium yellow and viridian to give a bright, pale green mixture.

Uses

Most cadmium pigments are used in plastics. These pigments disperse well in most polymers, giving high opacity and tinting strength. The pigments are insoluble in organic solvents, have good resistance to alkalis, and in most cases, will remain lightfast for the life of the plastic. As a result, cadmium pigments have been used in a wide range of plastic products. Nowadays, their most significant application is in complex polymers, which are processed at higher temperatures and require the exceptional durability and technical performance of a cadmium pigment. They are almost mandatory in many nylon, acrylonitrile butadiene styrene (ABS), polycarbonates, high-density polyethylene, silicone resins, and other modern thermoplastic polymers processed at high temperatures which preclude the use of organic pigments and also most alternative inorganic pigments in the range of hues provided by cadmium. Cadmium-pigmented engineering polymers such as ABS are widely used in products which include telephones, gas pipes and fittings, electricity cables, beverage crates, and motor vehicle radiator fans.

Bright cadmium yellows, oranges, and reds are primary pigments for artists’ colors, where their permanence and opacity are the accepted standards against which other pigments are judged. Cadmium yellows and reds can have service temperatures well above 300 °C and are used in coatings for process chemical and steam pipes. They can also be incorporated into latex and acrylic coatings.

Permanence and Compatibility

The lightfastness or permanence of cadmium requires protection from a tendency to form carbonate salts with exposure to air slowly. Most paint vehicles accomplish this, but cadmium colors will fade in fresco or mural painting.

Oil Absorption and Grinding

Cadmium yellow (cadmium zinc sulfide) absorbs a moderate amount of oil, about 21.8 grams of linseed oil per 100 grams of pigment, to make a paste.

Toxicity

Cadmium sulfide is not very toxic (LD50 > 5000 mg/kg) when used as a pigment. Cadmium pigments are highly insoluble compounds of calcined cadmium zinc sulfide and cadmium sulfoselenide. Cadmium pigments are universally compatible and are recommended for high-performance applications where thermal stability, chemical stability, and weatherfastness are critical parameters. The level of cadmium solubility is tightly controlled to ensure compliance with: Council of Europe Resolution AP (89) 1 Food Contact Limits; USA TCLP Waste Leaching Limits; Safety of Toys Directive 88/378/EEC (EN71: Part 3 relates to finished toy compliance). Cadmium pigments are registered as non-hazardous substances under REACH in 2013 and are regulated under Annex XVII of the REACH legislation (1907/2006).

For more information on handling pigments, please visit How to Safely Handle Art Materials and Pigments.